Controlled Atmosphere Programmable Muffle Furnace For Heat Treatment 1000 C

Controlled Atmosphere Processing Hwf160-10nh Vacuum Atmosphere Furnace Heater Tank 1000°C with ISO Certification

This furnace is mainly designed for soldering process of metal parts and HTCC package, also can be used in other processes such as decarburization, annealing, quenching, scorching, hardening, thermal decomposition.

1. Rated Temp.: 900°C
2. Max Temp.: 1000°C
3. Atmosphere: N2, H2, with humidification
4. Oxygen Content: Measured by O2 content analyzer
5. Muffle Material: SUS 310S
6. Muffle Dimensions: φ750mm×900mm(d×D)
7. Effective Chamber Dimensions: 500×500×650mm(W×H×D)
8. Loading Method: Manual, through horizontal guideway shelves
9. Heating Method: Resistance wire pre-built heating plate
10. Cooling Method: Air cooling with blower
11. Temp. Control Stability: ± 1°C(controller with P.I.D function)
12. Profile Steps: Default 20 steps
13. Temp. Uniformity: ± 5°C
14. Thermcouple: Type K
15. Temp Control: 3 Points
16. Temp. Measurement: 1 Point
17. Max. Heating Power: 40kW
18. Typical Insulation Power: ≤ 25kW
19. Heating Speed: ≤ 5°C/min
20. Furnace Surface Temperature: ≤ 40°C
21. Max Vacuum Value: ≤ 10Pa
22. Exhaust System: 1 exhaust port on the top with H2 igniter
23. Alarm System: audible and visual alarm in case of over temp, thermcouple broken, low air pressure, low water pressure, substandard vacuum level, etc
24. Weight: 1500kg
25. Appearance Colour: Light Grey
26. External Dimensions: 1650mm×1950mm×2000mm (W×H×D)

1. Environmental Conditions: temp.: 0~40°C, humidity ≤ 80%RH, no corrosive gas, no strong airflow disturbance.
2. N2 Conditions: 99.999% purity, working pressure: 0.2-0.4MPa, Max gas consumption 2-6 m3/h.
3. H2 Conditions: working pressure: 0.2-0.4MPa, Max gas consumption 1-3m3/h.
4. Water Conditions: clean, no corrosive water, working pressure 0.1-0.3MPa, 3-9L/min
5. Ventilation System: non-contact access to the user pumping system, pumping capacity is greater than 15m3/h
6. Ground Requirements: horizontal, no obvious vibration, load-bearing> 500 kg/m2;
7. Power Condition(TBD): capacity > 55kVA, 3-phases 5-lines, voltage 220/380V, frequency 50Hz. Fire line: yellow, green, red, Zero line: blue, Ground line: yellow-green;
8. Installation Site: 3000mm×2500mm×3000mm(D×W×H), with an installation area greater than 7.5m2.